composite tube manufacturing

Composite tube manufacturing is made by catheter reflow machine. There are 7 steps.

1. Catheter Assembly

Composite tubes are often constructed of several layers of materials, including a liner, reinforcement layer, and outer jacket:
Liner: This is the innermost layer that contacts the fluids or devices passing through the catheter. It is usually made from materials with low friction, such as PTFE.
Reinforcement Layer: This layer may consist of braided or coiled materials such as stainless steel, nitinol, or kevlar to provide strength and flexibility. This layer helps to prevent kinking and to improve the pushability and torqueability of the catheter.
Outer Jacket: The outer layer provides structural integrity and is made from a thermoplastic material that can be bonded to the underlying layers.

2. Placement on a Mandrel

The layers are assembled over a mandrel, which is a solid rod that serves as a form to ensure the catheter maintains an open lumen during the reflow process.

3. Application of Heat

Once assembled, the catheter is subjected to heat. This can be done in a variety of ways, such as CM80 catheter reflow machine. The temperature must be controlled precisely to ensure that the outer thermoplastic layer melts without damaging the reinforcement layer or the liner.

4. Melting and Fusing

As the thermoplastic outer jacket is heated, it becomes soft and starts to flow. The heat causes the material to reflow around the reinforcement layer, encapsulating it completely. If there are adhesives or bonding agents present, these will also be activated by the heat.

5. Cooling and Solidification

After sufficient time in the heated state to ensure complete fusion of the layers, the catheter is gradually cooled. Controlled cooling is crucial to prevent material warping and to ensure that the catheter maintains its desired shape.

6. Removal from Mandrel

Once the catheter has cooled and the materials have solidified, it is carefully removed from the mandrel. The result is a multi-layered catheter that has a strong, integrated structure.

7. Post-Processing

The catheter may then undergo various post-processing steps, such as tip forming, hole punching, and surface treatments. Additionally, quality control measures are undertaken to ensure that the catheter meets all required specifications.

Composite tube manufacturing is highly customizable.The production of catheters with varied properties suited to different medical applications. The precise control of temperature, heating and cooling rates, and selection of materials are critical factors in the success of the composite tube manufacturing.

Send us your ideas and we’ll get in touch with you within 24H!

Share this post!

Request A Quote