What is guide wire size?

The size of the guide wire usually guides the size of the outer diameter of the wire. It is usually expressed in inch or millimeter. Guidewires are guiding instruments used for the introduction of the catheter system, and for this reason, the units of guidewire diameter coincide with the units of catheter lumen diameter, which are in inches. Size is an important parameter when selecting a guidewire, as it can affect the maneuverability, support, and traversal of the guidewire within the vessel. 

The following are common guidewire diameter classifications:

0.010 inch guidewire (approximately 0.25 mm ): 

Guidewires of this diameter are commonly used for minimally invasive procedures such as minimally invasive neurological interventions and minimally invasive vascular interventions because they are thinner and can pass through smaller catheters or sheaths.

0.014 inch guidewire (approximately 0.36 millimeters):

This is the most commonly used guidewire diameter and is widely used for cardiac and vascular interventions such as coronary stenting and other vascular disease treatments.

0.018 inch guidewire (approximately 0.46 mm):

It is typically used for larger vessels, such as peripheral vascular interventions and other vascular disease treatments. They typically have better support but may be slightly less maneuverable.

0.035 inch guidewire (approximately 0.89 mm):

This thicker guidewire is typically used for larger vessels and organs, such as aneurysm embolization, venous cannulation, and other large vessel procedures. 

There are also other sizes of guidewires, such as 0.012 inch (about 0.30 mm), 0.016 inch (about 0.41 mm), and 0.038 inch (about 0.97 mm). Depending on the needs of the procedure and the experience of the surgeon, guidewires of different diameters may be selected. When performing cardiac and vascular interventions, selecting the appropriate guidewire diameter is critical to achieving a successful procedure and minimizing complications.

CatheterMelt guidewire tipping machine suits 0.014inch-0.038inch guidewire. It can be perfectly formed, processed in one time, simple and efficient, and the yield rate is very high.

Send us your ideas and we’ll get in touch with you within 24H!

Share this post!

Request A Quote