Catheter Tipping Machine-CM110

This machine is used for the catheter and guidewire tipping forming process. It including taper tips, radius tips, soft tips, closed end tips, dilator tips, sheath tips, flaring, neck downs, overlap welds. butt welds, braid to non-braid welds, multilumen applications, balloon tips and welds, guidewire tips and some custom applications. It features a high-quality inductive heating driver board with precise temperature control and make the catheter tip quality consistently.

Catheter Tipping Machine-CM110 Description

Additional information

Size L x W xH

480 x 330 x 275mm


220V, 200W, 50Hz

Heating Elements


Heating Range


Maximum Temperature Accuracy

+/- 2℃

Air Pressure


Tip Forming Length


Catheter Diameter Treatment Range

2-42Fr for catheter, 0.014-0.038inch for guidewire

Applicable Molding Material


Applicable Products

PICC, CVC, Foley catheter, ureteral stent, dilator, coated guidewire and so on

Product Introduction:

CatheterMelt catheter tipping machine utilize  RF welding induction heating and closed loop feedback control to process the tip forming. This equipment is compact and  fit on most desktops. Its weight is around 15kg, size is 480mm*380mm*275mm. There are two version: CM110-3B and CM110-3C force control version. CatheterMelt catheter tipping and end forming equipment is designed to meet the needs of all kinds of medical catheters and guidewires.


Peek tube Tip, Dilator tip, Sheath tip, Balloon tip, CVC, Closed end tip, Conical/ Taper, Urinary, Soft tip, Radius tip, Angle tip, Neck down, Tip and end forming, Multi-lumen tip, Angiographic, Tracheal, Butt welds, Overlap welds, Braid to non-braid welds, Hub welds, Flares, Arrow heads and so on.

cathetermelt catheter tipping solutions


Advantages of our catheter tipping and end forming equipment:

1. PID temperature control, Closed-loop temperature control, stable temperature rise to 260 degrees in 3 seconds

2. Mold heating area adjustable

3. It is convenient to change the mold, and the product compatibility is high. One machine is suitable for multiple guidewires and catheters

4. Air cooling

5. Catheter gripper movement is controlled by motors. Compared with pneumatic, it is more accurate and precise slide stroke adjustment with position

6. The machine is compact, easy-to-use and cost-effective. with quick change tooling for efficient production

7. Colorful touch screen, full digital control, quantitative control of production process

8. The cost rate is high, the product has no burrs, flying spurs

9. There is no exposed heating part and safe for operator

Working process

Insert the mandrel catheter into the heated die or mold, When start RF heat to pre-heat the mold, catheter tip melting and forming. After cooling the mold, remove the mandrel and catheter.

Request A Quote