Long Guidewire Coating Machine

This machine is mainly used in the long guidewire hydrophilic coating process.

Long Guidewire Coating Machine Description

Additional information

Power

380V, 11Kw, 50Hz

Coating Length

3200mm

Air Pressure

0.4-0.6MPa

UV Radiant Energy

>1500mw/cm²; Lifecycle 7000H

UVA Spectral Range

240-470nm, mainly distributed in 360-370nm

Linear Travel Speed

0.1-100mm/s

Loading Quantity

10 stations at same time

Product introduction:

This machine is mainly used in the long guidewire hydrophilic coating process.

R&D Background:

Currently, there are only two solutions available on the market for long guidewire coating: either the machine height must be increased indefinitely or multiple segmented coatings must be applied.

The former solution requires ultra-long UV lamps and machines for irradiation, and imposes strict plant height requirements. Additionally, the tip of the guidewire is prone to swinging during the coating process. The latter solution involves coating overlap at the joints, resulting in uneven guidewire diameter and a complex operation process.

We have pioneered and successfully developed a third solution globally: the Folding Guidewire Coating Machine. With a standard height of 2000mm, this machine can coat guidewires up to 3200mm in length with ease.

Size:

Feature:

1. Only for ultra-long guidewire coating process use
2. Small swing range and no slip marks on guidewire surface
3. LED light , less heating radiation, and lifecycle of up to 7000H

Request A Quote